?

How to Use YomeGarden Bullets Vibrator

The Best Sex Toy 2019 – Amazon Alexa Controlled Vibrator
02/23/2019
Show all

How to Use YomeGarden Bullets Vibrator

We received feedback from several customers who mentioned that the remote control has not working.

First of all, our products are 100% fully inspected before shipment. Although we can’t guarantee that all are good products,but we don’t think the defect rate is so high. Secondly, after carefully read customer reviews and the analysis by our technical team, it is more obvious that our product description is not specific enough.This is why we write this post.

YomeGarden Wearable Wireless Remote Control Bullet Egg Vibrator

 

Buy On Amazon

 

1.Our customer service team produced a 2-minute guide video and uploaded it to Youtube already. Once all customers purchased our products, our mail system will automatically send the video link to your email address. (So we recommend all of our customers, please do NOT blocked email notification from Amazon,or you can not to receive emails) We strongly recommend that you take 2 minutes to watch our video before used the product to learn more about your bullets.

2.Considering that there are thousands of AAA batteries on the market, there may be some battery voltages that are too high and the remote control will not work properly. So we are considering attach one AAA battery to the packaging from the next shipment to Amazon. This does not require additional costs for our customers, but it can improve customer experience.

USB rechareable

Again, we will summarize our previous articles on how to use the product correctly to make it easier for our customers to see.

 

Finally, we want to briefly review how the product is used, because we also know that you may not have time to view all the articles, which can save you valuable time.

  1. Once you receiving the product,please check the product packaging for complete all accessories. Our products include 1x bullets vibrator, 1x remote control, 1x USB charging cable, 1x manual plus a storage bag.
  2. Test the charging function works. Connect one side of the USB cable to the bullets. Please watch the video at the specific location. The other side is connected to the wall charger. If the LED blinks, that’s means the charge works.
  3. Make sure to charge for at least 1 hour until the LED light is on. Note: The battery protection system designed in the bullets to ensure that the battery will not be damaged by overcharging. However, the con is the battery will be detected from time to time during the charging process, so occasionally a few minutes after the charger is plugged in, the LED light is on. Please ignore it at this time, please make sure to charge it for at least 1 hour or above.
  4. Please wash at least once with warm water before used. Do not use hot water as this will damage the silicone case of the bullets. It can be cleaned with a neutral detergent, such as detergents or soaps sold in supermarkets. Remember do NOT use corrosive detergent such as alcohol to clean the product, which can result in permanent damage of the silicone.

5.Bullets can be used alone or with remote control. If it is the former, simply long press the power button 3s on the bullets, and wait for the LED on then enter the standby mode, then short press the power button for 1 second to switch the different vibration modes. If the power button is clicked twice quickly, the heating function is activated and the bullets are heated from normal temperature to 108 °F in 3 minutes. Of course, you can double-click the power button again to turn off the heating function anytime.

If you would like to use with the remote controller, you need to confirm that the bullets enter the standby mode first, long press the power button on the remote control for 3s, after the pairing is completed, the bullets will start to vibrate. Then you can switch between different vibration via the remote controller. Again,if you want to give your honey a big surprised, please make sure the bullets are in standby mode.

In short, you first press the power button for 3 seconds to let the bullets enter standby mode, and then press 1s for normal use. If you would like to used with remote controller, after confirming that the bullets enter the standby mode, long press the power button on the remote control for 3s, and the pairing is successful.Hope it works for you.

  1. Please pay attention use of warm water to clean the product after used, do not use hot water or alcohol to clean. We suggest dried with a towel or air-dried after washed. Do not use a hair dryer or other products to directly accelerate the process. At last,placed the bullets in your storage bag and be careful not to placed it where your childs can see it.

That’s it. We hope that all of our customers will be satisfied with our products and services, and sincerely hope that you have perfect sex time!

Post Footer automatically generated by wp-posturl plugin for wordpress.

Summary
How to Use YomeGarden Bullets Vibrator
Article Name
How to Use YomeGarden Bullets Vibrator
Description
Bullets can be used alone or with remote control. If it is the former, simply long press the power button 3s on the bullets...
Author
Publisher Name
YomeGarden
Publisher Logo
Content Protection by DMCA.com
Spread the love
  • 1
  •  
  •  
  •  
  • 1
  •  
  •  
  •  
  •  
  •  
  •  
    2
    Shares

Leave a Reply

Your email address will not be published. Required fields are marked *